With Intense Pure Air XL, breathe in healthier air in total tranquility, thanks to four dedicated levels of filtration designed to capture even the finest particles and permanently destroy formaldehyde - the most harmful indoor air pollutant.
Built with smart technology, the amount of pollution in the home is detected through sensors which automatically adjust filtration speed accordingly.
The device's high efficiency is defied by its quiet performance, as low as 28dB(A), with easy-to-maintain filters.
Rounded off by an adjustable air outlet for optimum performance and comfort and a special automatic night mode, Intense Pure Air XL provides outstanding filtration for pure air at home.
ULTIMATE PERFORMANCE AND LONG-LASTING EFFICIENCY
Permanently destroys formaldehyde*, the most harmful indoor air pollutant, thanks to the exclusive and patented NanoCaptur filter. Classical filtration technologies only trap and may release up to 100% formaldehyde after filter saturation.
Great comfort of use
Automatic Pollution Detection & Speed auto regulation
Place the purifier on a flat, stable surface in the room requiring treatment. To allow the air to circulate freely, avoid placing the appliance behind curtains, below a window, item of furniture or shelf unit, or close to any other obstacle, and leave at least 50 cm of free space on each side of the appliance.
• The pre-filter must be cleaned every 2 to 4 weeks. • The active carbon filter must be replaced when the "Odor" indicator light lights up, otherwise at least every year. • The HEPA filter must be replaced when the "HEPA" indicator light lights up, otherwise at least every 3 years. • The NanoCaptur filter must be replaced according to the saturation indicator (refer to the colour chart on the filter); check the degree of saturation every 6 months. Guidelines based on 8 hours of use per day at speed 2.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
There may be several reasons: • A layer of dust is covering the senor lense; clean the sensor lense. • If the light still indicates that the air quality is poor, adjust the sensitivity sensor to 'Low sensitivity' or 'Average'; to make this change, check the instructions manual. • If the light still indicates that the air quality is good, adjust the sensitivity sensor to 'Sensitive' or 'Average'; to make this change, check the instructions.
The 'Intense Pure Air' air purifier allows you to breathe up to 99.95% pure air in your home, and as such to protect your health thanks to the four levels of filtration described below: • Level 1: PRE-FILTER for dust, hair, fur • Level 2: ACTIVE CARBON FILTER for volatile organic compounds (VOCs), odours / gases • Level 3: HEPA FILTER for fine particles (PM2.5), pollens, acarids, animal allergens, mould, bacteria / viruses • Level 4: NANOCAPTUR FILTER for formaldehyde