Tefal Inicio

Inicio Easier On Clothes , Harder On Wrinkles
  • Thanks to Inicio steam iron, its steam boost and its easy gliding ceramic soleplate, ironing will be fast and convenient.

Ironing made faster with easy wrinkle removal

Discover Inicio, a powerful steam iron that features a non-stick soleplate for fast & easy ironing sessions!
  • Combining steam boost and ceramic soleplate that glides easily, ironing will be fast.
  • Thanks to it lightweight design, it offers comfort along with efficiency.
  • A continuous steam output of 20 g/minute delivers fast results.
  • The 80 g/minute steam boost tackles stubborn creases.

 

 

 

 

 

Essentials
  • Easy Gliding

    Special attention was given to the design and the manufacturing of the soleplate: smooth edges together with the Ceramic coating make it extremely very easy gliding

  • FV1244O1_B2.jpg

    Steam boost up to 80g/min to remove even the toughest creases

    Use the steam boost to remove stubborn creases or to refresh your clothes with vertical steaming.

  • FV1310X1_B2.jpg

     Continuous steam ouput to ease crease removal

     Continuous steam output of up to 20g/min gives you the ideal constant amount of steam to remove creases with ease.

  • FV1310X1_B4.jpg

     The spray moisterizes the fabrics to help you remove the difficult creases.

Features
Soleplate Technology Ceramic  
Water tank capacity 200 ml  
Power cord length 1,9 m  
Colours Pink  

Frequent questions

No, leave the iron to cool down before putting it away and follow the 4 tips: empty out the water remaining in the tank, set the thermostat to the minimum, close the steam control and stand it upright or place it on the base (depending model).


If your iron has an anti-calc system, you should clean the anti-calc valve once a month. To do this, unplug the iron and leave it to cool for 30-45 minutes. Empty the water and remove the valve, holding it by the top. Let the anti-calc valve soak for 4 hours in a glass of commercially available white vinegar or natural lemon juice, then thoroughly rinse the anti-calc valve under tap water. Reposition the anti-calc valve into your iron. Warning! Never touch the end of the anti-calc valve. the iron does not work without the anti-calc valve.


Gently shake your iron to reactivate it, the lights should start to flash and then the product should start to heat up.

The electronic system cuts the power and the auto-stop light flashes if the iron is not moved for more than 8 minutes (on its heel rest or base) or is left flat for more than 30 seconds. To turn the iron back on, gently shake it until the light goes out.
Find more detailed information in the Guarantee section of this website.