CALORE Faster, Easier, Better *

*Compared to a dry iron from the same manufacturer - tested on cotton.

  • Mastered steam to humidify and soften your fabrics, for easy ironing sessions.
  • Use its steam boost function to remove efficiently even tough creases.

Enjoy fast steam ironing thanks to Calore

Introducing Calore, a compact steam iron that comes with powerful steam boost so you can easily remove creases - even tough ones - in no time!
Experience steam ironing:
  • with continuous steam (moistens and softens your fabrics for smoother ironing)
  • powerful burst of steam (up to 30g of steam per minute for instant crease removal).






Soleplate Technology Non stick  
Water tank capacity 150 ml  
Power cord length 1,8 m  
Colours White & Green  

Frequent questions

No, leave the iron to cool down before putting it away and follow the 4 tips: empty out the water remaining in the tank, set the thermostat to the minimum, close the steam control and stand it upright or place it on the base (depending model).

If your iron has an anti-calc system, you should clean the anti-calc valve once a month. To do this, unplug the iron and leave it to cool for 30-45 minutes. Empty the water and remove the valve, holding it by the top. Let the anti-calc valve soak for 4 hours in a glass of commercially available white vinegar or natural lemon juice, then thoroughly rinse the anti-calc valve under tap water. Reposition the anti-calc valve into your iron. Warning! Never touch the end of the anti-calc valve. the iron does not work without the anti-calc valve.

Gently shake your iron to reactivate it, the lights should start to flash and then the product should start to heat up.

The electronic system cuts the power and the auto-stop light flashes if the iron is not moved for more than 8 minutes (on its heel rest or base) or is left flat for more than 30 seconds. To turn the iron back on, gently shake it until the light goes out.
Find more detailed information in the Guarantee section of this website.